BIG BAG
U-BODY
Big bag U-body consists of a U-shaped fabric body seamed together with 2 vertical panels. There are 4 lifting points: the loops are sewn on top of the 4 corners of the big bag.
Water
Proof
Mechanical
Resistance
- BIG BAGS FOR AGRICULTURAL INDUSTRY
- BIG BAGS FOR THE FOOD INDUSTRY
- BIG BAGS FOR THE MINING INDUSTRY
- BIG BAGS FOR THE CHEMICAL INDUSTRY
- BIG BAGS FOR THE PLASTIC INDUSTRY
- BIG BAGS FOR THE ECOLOGICAL INDUSTRY
CAPACITY
- from 500 to 2000 Kg
CERTIFICATES
- UN Group II and III
- ISO 22000
SECURITY FACTOR
- 5:1 Single Trip
- 6:1 Standard Duty
ACCESSORIES
- Liner
- Customized printed logo up to 4 sides/3 colours
- Dustproof seams with wick or felt
- Food grade seams
- Extra cleaning with vacuum system and metal detector
- Document pockets
- B-Lock or Velcro closing systems
SPECIAL OPTIONS
- Flat fabric weight: 55-265 gr/m2
- Minimum weight of coating: 15 gr/m2
- Flat fabric width: 70-420 cm
- Maximum flat fabric width: 225 cm
FABRIC
- Flat standard
- Flat coated
- Anti-static fabric
- Coloured fabric
- Aerated fabric
BASE DIMENSIONS: 79X79 (cm)
- Volume: 0.5 > Height: 80
- Volume: 0.75 > Height: 120
- Volume: 1.0 > Height: 160
- Volume: 1.25 > Height: 200
BASE DIMENSIONS: 91×91 (cm)
- Volume: 0.5 > Height: 60
- Volume: 0.75 > Height: 90
- Volume: 1.0 > Height: 120
- Volume: 1.25 > Height: 150
- Volume: 1.5 > Height: 180
- Volume: 1.75 > Height: 210
- Volume: 2.0 > Height: 240
BASE DIMENSIONS: 95×95 (cm)
- Volume: 0.5 > Height: 55
- Volume: 0.75 > Height: 85
- Volume: 1.0 > Height: 110
- Volume: 1.25 > Height: 140
- Volume: 1.5 > Height: 165
- Volume: 1.75 > Height: 195
- Volume: 2.0 > Height: 220
BASE DIMENSIONS: 99×99 (cm)
- Volume: 0.5 > Height: 50
- Volume: 0.75 > Height: 75
- Volume: 1.0 > Height: 100
- Volume: 1.25 > Height: 125
- Volume: 1.5 > Height: 150
- Volume: 1.75 > Height: 175
- Volume: 2.0 > Height: 200
DOS
DONTS
RECOMMENDATIONS FOR USE
- Pay attention to the instructions for use written on the label.
- Before filling the big bag in, check that the discharge spout is properly closed.
- Once it has been filled in, make sure that the big bag is stable.
- Shut the load system correctly.
- Adopt adequate solutions to withhold solid materials in powder form.
- Consider the possibility of electrostatic charges during filling phase.
- Check that the forks of the lift truck are round or well protected.
- Tilt back the forks of the lift truck towards the driver.
- Adapt the distance between the forks of the lift truck according to the lifting loops of the big bag.
- Protect the big bags from direct sun exposure and from bad weather.
- Properly fasten the pallets on truck during transportation.
- Smaltire il container conformemente alla normativa vigente.
- Do not exceed the SWL (safety working load) under any circumstances.
- Do not fill the bag inappropriately.
- Do not suddenly speed up or slow down during transportation.
- Do not lift or lower the big bag suddenly during transportation.
- Do not stop under hanging big bags.
- Do not position the big bags half outside the truck or off the pallet for it may fall and cause damages.
- Do not move the lift truck before having entirely lifted the full big bag.
- Do not tilt forks of truck forward.
- Do not stack the big bags, unless you have checked their stability.
STAY IN TOUCH
Head Office: via dell’Artigianato 3/5, 25028 Verolanuova (BS)
Telephone: +39 030 9360002
E-mail: info@minini.it
Fax: +39 030 9360002
SCRIVICI
CHIAMACI